Bitumen solutions and adhesives - Primer K-100

FIND YOUR NEAREST DISTRIBUTOR

Katepal products are available all around Finland. Our map service allows you to easily find the sales location closest to you. We welcome you to use our quality Katepal products!

To a map of distributors >
A guaranteed-strength bitumen roof

Katepal grants a 15-year warranty for Kattolaatat shingles.

Primer K-100

K-100
ELASTOMER PRIMER
KBL 20/100

Black, cold-applied thin elastomer bitumen primer. Includes special bitumen solution, elastomer and active adhesive agents.

How to use:
Clean and dry the surfaces to be treated, if necessary. Use a brush or a roller to apply or spray with one layer of Bitumen solution K-100. The surface must be completely dry before it is treated further. Consumption 0.1…0.3 l/m2. Stains and tools are cleaned up mechanically, using white spirit or mineral turpentine.

PLEASE NOTE: Do not apply to a hot surface, mix with hot bitumen or brush the coated surface with hot bitumen immediately after the application.

Properties:

Drying time around 2-3 hours at + 20 °C, depending on the thickness of the layers. In cold, damp conditions, the drying time may be many times longer.

Storing:

In a dry place protected against sunlight and heat.

Instructions for environmental protection:
Empty package and a dried product can be taken to a landfill. Waste including fresh product is hazardous waste, which needs to be disposed of in accordance with waste management legislation and instructions from the environmental authorities.

Information

EAN Litres / package Kg / package packages / pallet
6417443510081 200 180 4
6417443510074 20 18 36
6417443510012 0.4 0.4 480
EAN6417443510081
Litres / package200
Kg / package180
packages / pallet4
EAN6417443510074
Litres / package20
Kg / package18
packages / pallet36
EAN6417443510012
Litres / package0.4
Kg / package0.4
packages / pallet480

Properties

Use: As a primer for concrete, plaster, metal and similar surfaces in challenging applications.
For outdoor use only.
Application: Brush, roll or spray
Consumption: 0,1 - 0,3 l /m3 / m2
Thinner and cleaning of equipment: white spirit or mineral turpentine